Features

High performance cutter using ultrasonic vibration of 38,000 to 40,000 times per second

With the razor blade sharpness, you can cut complex shapes as you like at a light touch.

  • Improved visibility

    The digital LED display on the controller clearly shows the status of the operating function. The Green LED on the handpiece will indicate whether the power is ON or OFF.

    Lighter weight

    The weight of the controller has been reduced by 46% compared to the previous model.
    (Sonic Cutter : 2.6 kg → Sonic Cutter ZERO : 1.4 kg)

    Overheat protection function

    The overheat protection function enables continuous use. When a specified temperature is detected, the output will be automatically adjusted to suppress the temperature from rising.
    If the excessive heat is detected, the unit will stop operating for safety.

  • Reduction of heat level in handpiece

    Improvements in the transducer achieved a lower heat level by 28.6 degrees Celsius maximum compared to the previous model.
    Efficiency has been improved.

Specifications

  • Product name Sonic Cutter ZERO Controller
    Oscillation frequency 38 - 40kHz
    Frequency control Auto-tracking system
    Output 30 W (max.)
    Output adjustment 21 steps variable
    Rated input AC 100 - 240V, 50 / 60 Hz, 24 W
    Weight 1.4 kg
    Dimensions W 161 mm × D 256 mm × H 84 mm

    * Not compatible with the previous model Sonic Cutter.

  • Product name Sonic Cutter ZERO handpiece
    Cord length 3 m
    Weight 120 g (excluding cord)

    * Not compatible with the previous model Sonic Cutter.