Ultrasonic polisher
High-speed polisher using ultrasonic vibrations from 19,000 to 29,000 times per second with a maximum amplitude of 40 μm.
Vibration is not transmitted to the hand, and safety is further improved with high efficiency through circuit optimization and overheat protection function.
Features
Improved visibility
The digital LED display on the controller clearly shows the status of the operating function.
Output, amplitude, wattage, and error code are displayed.
The blue LED on the handpiece illuminates during operation to show power on.
Lighter weight
The weight of the controller has been reduced by 29% compared with the previous model. Convenient to carry.
(SHEENUS neo: 2.1 kg → Sheenus ZERO: 1.5 kg)
140 g lightweight resin handpiece body.
High efficiency through circuit optimization
The transmission efficiency has been improved by 16% compared with the previous model: SHEENUS neo.
Improved energy consumption
13% reduction compared with the previous model.
(SHEENUS neo: 31 W → Sheenus ZERO: 27 W)
Overheat protection function
Output automatically adjusts to load to prevent overheating for continuous use.
*In case of a rapid temperature rise, it will stop with an error.
Specifications
Sheenus ZERO Controller
| Oscillation frequency | 19–29 kHz |
| Frequency control | Auto-tracking system |
| Outputs | 45 W (max.) UNCLAMP mode 20 W (max.) CLAMP mode |
| Output adjustment | 21 steps variable |
| Rated input | AC 100–240 V, 50/60 Hz, 42 VA |
| Net weight | 1.5 kg |
| Dimensions | W161 mm × D256 mm × H84 mm |
Sheenus ZERO handpiece
| Cord length | 3 m |
| Net weight | 140 g (excluding cord) |
*Please use our exclusive tools for Sheenus ZERO.
Use of the others tools may result in premature failure.
